Starboard SUP Windsurfing iGo ZEN 11'2

Starboard SUP Windsurfing iGo ZEN 11'2"

Technology

• WOVEN TECHNOLOGY
  Up to 2kg lighter // Extra Stiff.
• WELDING TECHNOLOGY
  HEATED AND BONDED FOR LIFE
• MECHANICAL BOND = STRENGHT + DURABILITY
  Glue is never forever.
  Starboards’ welding technique turns two into one – using heat to bond two separate pieces of PVC into a single solid unit. Heat-welded PVC creates a mechanical bond that’s stronger, lasts longer – and is better for the environment.
• FULL POWER PLANING
  Our SUP Windsurfing Inflatables feature our 3D Rail Edge technology, a proprietary 3D elastomer compound that follows the contours of the board and creates a release edge that allows the boards to fully plane yet fold and roll up. Thanks to this 3D Rail Edge, you can accelerate and enjoy the most exciting planing sensation possible on an inflatable board.
• REMOVABLE MAST TRACK
  All SUP Windsurfing boards use the new removable mast track system that leaves a flat deck in the paddle board mode.
• FOOTSTRAP SYSTEM
  Starboard’s exclusive footstrap insert system uses 7mm thin insert plates that are glued to the board’s surface. The footstraps bolt into the embedded brass plate and two male pins connect through the footstrap for a twist-free fitting.
• REMOVABLE CENTER FIN
  All models have a removable center fin box. Remove the box for an improved paddling experience without the added weight or drag. Attach the box and supplied Drake Shallow center fin to prevent the board from drifting sideways when windsurfing.
• D-RINGS
  They also feature two D-rings: one in the nose that acts as a towing eye for easy transport and one in the tail that acts as a leash plug. Paddle boarding without a leash is dangerous and not recommended.
• RE-COVER BAG
  All of our SUP WINDSURFING Inflatables are supplied with our new roller-wheeled bag that packs everything away tidily and conveniently. Made of a RPET 450D outer fabric layer made from recycled plastic bottles, in partnership with Waste2Wear. The bottles are chopped into flakes, washed, melted and extruded into yarns and then spun into a fabric. Between 30 to 50 bottles are used per bag. Bottles that now re-enters the market again, without risk of polluting the environment. Ripstop weaving technology improves wear and tear resistance.
• DOUBLE ACTION PUMP
  All our Deluxe boards are supplied with our ergonomic highly efficient Tiki Pump and all our Zen boards are equipped with our benchmark V8 Double Action pump. Inflate your board faster and easier with continuous pumping cycles in both down and upward action. Turn the switch and it becomes a single action pump for easy inflation to 18 PSI. Always inflate between 15 and 18 PSI for maximum stiffness and performance.