Mr Zog's SexWax Quick Humps Cool

Mr Zog's SexWax Quick Humps Cool

Recommended for 14° - 23°.

Sexwax Quick Humps surfboard wax formulas are the "go to" choice for professional and experienced surfers around the world. Find the ideal balance between stability and stickiness by utilizing these formulas alone or as part of a Basecoat/Topcoat combination. Each bar individually packaged in shrink film. For futher tips on formula selection see the Quick Humps/Dream Cream User Guide.

SINGLE WAX OR BASECOAT/TOPCOAT?

WHAT IS THE DIFFERENCE BETWEEN HARD & SOFT WAX?

Softer waxes will be:

• Stickier
• Easier to apply
• More likely to move or rub away at pressure points on your board

Harder waxes will be:

• Less sticky
• Somewhat more difficult to apply
• More likely to stay in place and not rub off

WHAT SHOULD A GOOD SURF WAX PROVIDE?

• Moderate to high levels of stickiness
• Stability Underfoot

WHAT IS A SINGLE WAX APPLICATION?

• A Single Wax Application is where only one formula of wax is used at a time.

WHAT ARE THE SHORTCOMINGS OF A SINGLE WAX APPLICATION?

• Increased Stickiness requires a softer wax which in turn will reduce Stability Under Foot.

SHOULD I CONTINUE USING JUST A SINGLE WAX APPLICATION?

• If Single Wax levels of stickiness and stability are adequate for your needs then there is no reason for you to switch to Basecoat/Topcoat combinations.

WHEN SHOULD I USE A BASECOAT/TOPCOAT COMBINATION?

• When you want to increase the stickiness you get with your single wax application without sacrificing stability.

HOW DO BASECOAT & TOPCOAT COMBINATIONS WORK?

• A harder Basecoat formula provides Stability Under Foot with a long lasting surface texture that can hold the softer Topcoat wax in place and prevent it from moving or rubbing away at strategic points on the deck of your surfboard.
• Once you have a firm Basecoat, your Topcoat wax can be much softer and stickier than anything you could use without a Basecoat.

WHAT ARE THE RULES FOR BASECOAT/TOPCOAT COMBINATIONS?

• A Basecoat must be sufficiently hard to remain stable at the current water temperature.
• You can use anything you want as a Topcoat wax as long as it is softer than your Basecoat wax.

USING QUICK HUMPS FOR SINGLE WAX APPLICATIONS

• The recommended temperature range for a Single Wax Application is printed on the front of each Quick Humps label.
• Each Quick Humps label has its own "X-NUMBER" which indicates the relative hardness and stickiness of the six different formulas. The "1X" formula is the softest and stickiest Quick Humps Formula and the "6X" formula is the hardest and least sticky formula.
• When recommended temperatures for two or more Quick Humps formulas overlap, use the "X-NUMBERS" to determine your preference.